AIR CONDITIONING AMPLIFIER INSTALLATION

PROCEDURE

1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

   
   
   1. 

      *A	for Automatic Air Conditioning System
      *B	for Manual Air Conditioning System
      *a	Guide
      	Install in this Direction
      	Bolt
      	Connector

      for Automatic Air Conditioning System:

      
      

      1. Attach the guide to install the air conditioning amplifier assembly with the bolt.

         Torque:

         6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

      2. Attach the clamp.

      3. Connect the 2 connectors.

   2. for Manual Air Conditioning System:

      
      

      1. Attach the guide to install the air conditioning amplifier assembly with the bolt.

         Torque:

         6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

      2. Attach the clamp.

      3. Connect the connector.

2. INSTALL NO. 1 REAR AIR DUCT

   Click here

3. INSTALL NO. 3 REAR AIR DUCT

   Click here

4. INSTALL NO. 2 REAR AIR DUCT

   Click here

5. INSTALL NO. 5 REAR AIR DUCT

   Click here

6. INSTALL NO. 4 REAR AIR DUCT

   Click here

7. INSTALL FRONT FLOOR CARPET ASSEMBLY

   Click here

8. INSTALL LOWER CENTER PILLAR GARNISH LH

   Click here

9. INSTALL LOWER CENTER PILLAR GARNISH RH

   Click here

10. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

11. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

12. INSTALL COWL SIDE TRIM BOARD LH

    Click here

13. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

14. INSTALL COWL SIDE TRIM BOARD RH

    Click here

15. INSTALL FRONT DOOR SCUFF PLATE RH

    Click here

16. INSTALL FRONT SEAT ASSEMBLY LH

    
    

    1. for Manual Seat:

       Click here

    2. for Power Seat:

       Click here

17. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

18. INSTALL CONSOLE BOX ASSEMBLY

    Click here

19. INITIALIZATION SERVO MOTOR (for Automatic Air Conditioning System)

    Click here