AIR CONDITIONING AMPLIFIER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for RHD vehicles.

PROCEDURE


  1. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY LH (w/ Rear Foot Duct)


    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

  3. REMOVE FRONT SEAT ASSEMBLY RH (w/ Rear Foot Duct)

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE FRONT DOOR SCUFF PLATE LH (w/ Rear Foot Duct)

    Click here

  5. REMOVE COWL SIDE TRIM BOARD LH (w/ Rear Foot Duct)

    Click here

  6. REMOVE FRONT DOOR SCUFF PLATE RH (w/ Rear Foot Duct)

    Click here

  7. REMOVE COWL SIDE TRIM BOARD RH (w/ Rear Foot Duct)

    Click here

  8. REMOVE REAR DOOR SCUFF PLATE LH (w/ Rear Foot Duct)

    Click here

  9. REMOVE REAR DOOR SCUFF PLATE RH (w/ Rear Foot Duct)

    Click here

  10. REMOVE LOWER CENTER PILLAR GARNISH LH (w/ Rear Foot Duct)

    Click here

  11. REMOVE LOWER CENTER PILLAR GARNISH RH (w/ Rear Foot Duct)

    Click here

  12. REMOVE FRONT FLOOR CARPET ASSEMBLY (w/ Rear Foot Duct)

    Click here

  13. REMOVE NO. 4 REAR AIR DUCT (w/ Rear Foot Duct)

    Click here

  14. REMOVE NO. 5 REAR AIR DUCT (w/ Rear Foot Duct)

    Click here

  15. REMOVE NO. 2 REAR AIR DUCT (w/ Rear Foot Duct)

    Click here

  16. REMOVE NO. 3 REAR AIR DUCT (w/ Rear Foot Duct)

    Click here

  17. REMOVE NO. 1 REAR AIR DUCT (w/ Rear Foot Duct)

    Click here

  18. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY


    1. B003NQ6C01
      *A for Automatic Air Conditioning System
      *B for Manual Air Conditioning System, Manual Cooler System
      B003OFB Remove in this Direction
      B003R2S Bolt
      B003LF2 Connector

      for Automatic Air Conditioning System:


      1. Disconnect the 2 connectors.

      2. Detach the clamp.

      3. Remove the bolt and air conditioning amplifier assembly.

    2. for Manual Air Conditioning System, Manual Cooler System:


      1. Disconnect the connector.

      2. Detach the clamp.

      3. Remove the bolt and air conditioning amplifier assembly.