COMPRESSOR(for 5L-E) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT

    Click here

  3. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. B003N00

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with magnet clutch.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  4. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. B003SDC

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnet clutch.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  5. REMOVE COMPRESSOR ASSEMBLY WITH MAGNET CLUTCH


    1. B003RGT

      Disconnect the connector.

    2. B003RHJ

      Remove the 4 bolts compressor assembly with magnet clutch.