BLOWER RESISTOR(for Rear Side) INSTALLATION

PROCEDURE

1. INSTALL REAR BLOWER RESISTOR

   
   

   1. 

      	Screw
      	Connector

      Install the rear blower resistor with the 2 screws.

   2. Connect the connector.

2. INSTALL QUARTER INSIDE TRIM BOARD RH

   Click here

3. INSTALL REAR NO. 2 SEAT LAP BELT OUTER ANCHOR COVER (w/ Rear No. 2 Seat)

   Click here

4. INSTALL REAR NO. 1 SEAT LAP BELT OUTER ANCHOR COVER

   Click here

5. INSTALL BACK DOOR SCUFF PLATE

   Click here

6. INSTALL REAR DOOR SCUFF PLATE RH

   Click here

7. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

   Click here