BLOWER RESISTOR(for Rear Side) INSPECTION

PROCEDURE


  1. INSPECT REAR BLOWER RESISTOR

    B003RRJC18
    *a

    Component without harness connected

    (Rear Blower Resistor)

    1. Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        4(HI) - 2(M2) Always 0.52 to 0.60 Ω
        4(HI) - 3(M1) Always 1.49 to 1.67 Ω
        4(HI) - 1(LO) Always 3.12 to 3.60 Ω

        If the result is not as specified, replace the rear blower resistor.