BLOWER RESISTOR(for Rear Side) REMOVAL

PROCEDURE

1. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

   Click here

2. REMOVE REAR DOOR SCUFF PLATE RH

   Click here

3. REMOVE BACK DOOR SCUFF PLATE

   Click here

4. REMOVE REAR NO. 1 SEAT LAP BELT OUTER ANCHOR COVER

   Click here

5. REMOVE REAR NO. 2 SEAT LAP BELT OUTER ANCHOR COVER (w/ Rear No. 2 Seat)

   Click here

6. REMOVE QUARTER INSIDE TRIM BOARD RH

   Click here

7. REMOVE REAR BLOWER RESISTOR

   
   

   1. 

      	Screw
      	Connector

      Disconnect the connector.

   2. Remove the 2 screws and rear blower resistor.