BLOWER RESISTOR(for Manual Air Conditioning System) INSPECTION

PROCEDURE


  1. INSPECT BLOWER RESISTOR


    1. B003L8NC05
      *a

      Component without harness connected

      (Blower Resistor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      4 (HI) - 2 (M2) Always 0.39 to 0.45 Ω
      4 (HI) - 3 (M1) Always 1.32 to 1.52 Ω
      4 (HI) - 1 (E) Always 2.08 to 2.40 Ω

      If the result is not as specified, replace the blower resistor.