BLOWER UNIT REASSEMBLY

PROCEDURE


  1. INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    1. B003N4C

      Attach the arm of the No. 1 blower damper servo sub-assembly to the link of the blower assembly as shown in the illustration.

    2. Install the No. 1 blower damper servo sub-assembly with the 2 screws.

  2. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. B003P87

      for Automatic Air Conditioning System:

      Install the blower with fan motor sub-assembly with the 3 screws.

    2. B003RXL

      for Manual Air Conditioning System:

      Install the blower with fan motor sub-assembly with the 3 screws.

  3. INSTALL AIR REFINER ELEMENT


    1. B003NXQC01
      B003OFB Install in this Direction

      for Automatic Air Conditioning System:

      Align the "UP" marks as shown in the illustration and install the air refiner element.

      Note

      Make sure that the "UP" mark is facing the correct direction before installing the filter.

    2. B003MM0C01
      B003OFB Install in this Direction

      for Manual Air Conditioning System:

      Align the "UP" marks as shown in the illustration and install the air refiner element.

      Note

      Make sure that the "UP" mark is facing the correct direction before installing the filter.

  4. INSTALL AIR FILTER CASE


    1. B003RPQC01
      B003OFB Install in this Direction (1)
      B003QYY Install in this Direction (2)

      for Automatic Air Conditioning System:

      Attach the claw and guide to install the air filter case.

    2. B003JGKC01
      B003OFB Install in this Direction (1)
      B003QYY Install in this Direction (2)

      for Manual Air Conditioning System:

      Attach the claw and guide to install the air filter case.

  5. INSTALL BLOWER MOTOR CONTROL (for Automatic Air Conditioning System)


    1. B003NZL

      Install the blower motor control with the 2 screws.

  6. INSTALL BLOWER RESISTOR (for Manual Air Conditioning System)


    1. B003M37

      Install the blower resistor with the 2 screws.