REAR NO. 2 SEAT OUTER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for RHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH


    1. B003MC6C02
      *a Bolt A
      *b Bolt B

      Attach the 2 guides and temporarily install the retractor of the rear No. 2 seat outer belt assembly RH with the 2 bolts.

    2. Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      Bolt A
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
      Bolt B
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    3. B003NDT

      Connect the rear No. 2 seat outer belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL SEAT BELT ANCHOR COVER CAP

    Click here

  3. INSTALL QUARTER INSIDE TRIM BOARD RH

    Click here

  4. INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH (for Floor Anchor)


    1. B003L9H

      Connect the floor anchor of the rear No. 2 seat outer belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  5. INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH (for Floor Anchor)


    1. B003PHH

      Connect the floor anchor of the rear No. 1 seat outer belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  6. INSTALL REAR NO. 2 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  7. INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  8. INSTALL BACK DOOR SCUFF PLATE

    Click here

  9. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

  10. INSTALL REAR NO. 2 SEAT ASSEMBLY LH

    Click here