REAR NO. 2 SEAT INNER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • B003L4P

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

  • Replace any other damaged parts as necessary.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

PROCEDURE


  1. INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

    Tech Tips

    Use the same procedure as for the other side.


    1. B003QEHC01
      B003OFB Install in this Direction

      Pass the rear No. 2 seat inner belt sub-assembly through the hole of the rear seat cushion cover with pad as shown in the illustration.

    2. B003JEIC01
      *a Protruding Part

      Install the rear No. 2 seat inner belt sub-assembly RH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the No. 2 seat inner belt sub-assembly to overlap the protruding part of the rear No. 2 seat adjuster.