REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 60 Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • B003L4P

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

  • Replace any other damaged parts as necessary.

PROCEDURE


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

    Click here

  2. REMOVE REAR SEAT RECLINING COVER LH

    Click here

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  4. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

    Click here

  5. REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

    Click here

  6. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

    Click here

  7. REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

    Click here

  8. REMOVE REAR SEAT LOCK COVER LH

    Click here

  9. REMOVE REAR SEAT LOCK COVER LH

    Click here

  10. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY LH

    Click here

  11. REMOVE REAR SEAT LOCK ASSEMBLY LH

    Click here

  12. REMOVE REAR SEAT LOCK ASSEMBLY LH

    Click here

  13. REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY LH

    Click here

  14. REMOVE REAR SEAT INNER TRACK ASSEMBLY LH

    Click here

  15. REMOVE REAR SEAT OUTER TRACK ASSEMBLY LH

    Click here

  16. REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH


    1. B003Q03

      While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook.

    2. B003RQM

      Pull out the No. 1 fold seat stopper band assembly from the rear end of the seat cushion cover with pad.

    3. Pull out the fasteners as shown in the illustration.

      B003K6BC02
      B003OFB Remove in this Direction - -
    4. B003SDKC01
      B003OFB Remove in this Direction

      Open the fasteners as shown in the illustration.

    5. B003MNQC01
      B003OFB Remove in this Direction

      While opening the No. 1 seat cushion cover sub-assembly LH, pull out the rear No. 1 seat lock cable assembly and rear center seat lap type belt assembly LH from the slit as shown in the illustration.

    6. Disconnect the connector.

      B003JGWC01
      B003R2S Connector B003LF2 A
      B003QHB Bolt - -

    7. Detach the clamp.

    8. Remove the bolt.

    9. B003JCYC01
      B003OFB Remove in this Direction

      Remove the rear center seat lap type belt assembly LH from the hole of the rear seat cushion cover with pad LH as shown in the illustration.

  17. REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY RH


    1. Detach the clamp.

      B003S7F
    2. B003SERC01
      *a Band
      B003OFB Remove in this Direction

      Disconnect the rear center seat lap type belt assembly RH from the band as shown in the illustration.

    3. B003Q4RC01
      B003OFB Remove in this Direction

      Remove the bolt and the rear center seat lap type belt assembly RH from the hole of the rear seat cushion cover with pad LH as shown in the illustration.