REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 40 Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • B003L4P

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

  • Replace any other damaged parts as necessary.

PROCEDURE


  1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


    1. B003LV5C01
      B003OFB Install in this Direction

      Pass the rear No. 1 seat inner belt assembly RH through the hole of the rear seat cushion cover with pad RH as shown in the illustration.

    2. Install the rear No. 1 seat inner belt assembly RH with the bolt.

      B003NZQC01
      *a Protruding Part - -
      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      The anchor part of the rear No. 1 seat inner belt assembly RH must not overlap the protruding part.

    3. Attach the clamp.

    4. B003JUBC01
      B003OFB Install in this Direction

      While closing the back of the seat cushion cover with pad as shown in the illustration, pull out the rear seat lock assembly installation part of the rear No. 1 seat lock cable assembly and the rear No. 1 seat inner belt assembly RH from the slit.

    5. B003OC6C01
      B003OFB Install in this Direction

      Close the fasteners as shown in the illustration.

    6. Push in the closed fasteners as shown in the illustration.

      B003R0JC01
      B003OFB Install in this Direction - -
    7. B003K0K

      Roll up the No. 1 fold seat stopper band assembly toward the rear end of the seat cushion with pad and push it into the seat cushion with pad in the direction indicated by the arrow shown in the illustration.

    8. B003SAR

      While sliding the part in the direction indicated by the arrow shown in the illustration, install the J hook.

  2. INSTALL REAR SEAT OUTER TRACK ASSEMBLY RH

    Click here

  3. INSTALL REAR SEAT INNER TRACK ASSEMBLY RH

    Click here

  4. INSTALL SEAT TRACK HANDLE SUB-ASSEMBLY RH

    Click here

  5. INSTALL REAR SEAT LOCK ASSEMBLY RH

    Click here

  6. INSTALL REAR SEAT LOCK ASSEMBLY RH

    Click here

  7. INSTALL NO. 1 SEAT LEG SUB-ASSEMBLY RH

    Click here

  8. INSTALL REAR SEAT LOCK COVER RH

    Click here

  9. INSTALL REAR SEAT LOCK COVER RH

    Click here

  10. INSTALL SEATBACK LOCK STRIKER COVER RETAINER

    Click here

  11. INSTALL REAR SEATBACK LOCK STRIKER COVER RH

    Click here

  12. INSTALL SEATBACK LOCK STRIKER COVER RETAINER

    Click here

  13. INSTALL REAR SEATBACK LOCK STRIKER COVER RH

    Click here

  14. INSTALL REAR SEAT RECLINING COVER RH

    Click here

  15. INSTALL REAR SEAT RECLINING COVER RH

    Click here

  16. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

    Click here

  17. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

    Click here