REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 40 Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • B003L4P

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

  • Replace any other damaged parts as necessary.

PROCEDURE


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

    Click here

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

    Click here

  3. REMOVE REAR SEAT RECLINING COVER RH

    Click here

  4. REMOVE REAR SEAT RECLINING COVER RH

    Click here

  5. REMOVE REAR SEATBACK LOCK STRIKER COVER RH

    Click here

  6. REMOVE SEATBACK LOCK STRIKER COVER RETAINER

    Click here

  7. REMOVE REAR SEATBACK LOCK STRIKER COVER RH

    Click here

  8. REMOVE SEATBACK LOCK STRIKER COVER RETAINER

    Click here

  9. REMOVE REAR SEAT LOCK COVER RH

    Click here

  10. REMOVE REAR SEAT LOCK COVER RH

    Click here

  11. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY RH

    Click here

  12. REMOVE REAR SEAT LOCK ASSEMBLY RH

    Click here

  13. REMOVE REAR SEAT LOCK ASSEMBLY RH

    Click here

  14. REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY RH

    Click here

  15. REMOVE REAR SEAT INNER TRACK ASSEMBLY RH

    Click here

  16. REMOVE REAR SEAT OUTER TRACK ASSEMBLY RH

    Click here

  17. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


    1. B003SAR

      While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook.

    2. B003P9S

      Pull out the No. 1 fold seat stopper band assembly from the rear end of the seat cushion cover with pad.

    3. Pull out the fasteners as shown in the illustration.

      B003OPCC01
      B003OFB Remove in this Direction - -
    4. B003Q7PC01
      B003OFB Remove in this Direction

      Open the fasteners as shown in the illustration.

    5. B003NRRC01
      B003OFB Remove in this Direction

      While opening the No. 1 seat cushion cover sub-assembly, pull out the rear No. 1 seat lock cable assembly and the rear No. 1 seat inner belt assembly RH from the slit as shown in the illustration.

    6. B003R7Z

      Detach the clamp.

    7. Remove the bolt.

    8. B003PURC01
      B003OFB Remove in this Direction

      Remove the rear No. 1 seat inner belt assembly RH from the hole of the rear seat cushion cover with pad RH as shown in the illustration.