FRONT SEAT INNER BELT ASSEMBLY(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for RHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH


    1. Install the front seat belt anchor plate.

    2. B003PM7C01
      *a Protruding Part

      Install the front seat inner belt assembly RH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

    3. Attach the wire harness clamp.

    4. B003RTUC01
      B003OFB Install in this Direction

      Close the cover as shown in the illustration.

    5. B003L0J

      Attach the wire harness clamp and connector clamp.

  2. INSTALL FRONT SEAT ASSEMBLY RH

    Click here