SEAT BELT WARNING LIGHT(for Rear) INSPECTION

PROCEDURE


  1. INSPECT TELLTALE LIGHT ASSEMBLY (SEAT BELT WARNING LIGHT (for Rear))


    1. B003QN4C01
      *a

      Component without harness connected

      telltale light assembly (seat belt warning light (for Rear))
      *b Rear Seat LH Indicator
      *c Rear Center Seat Indicator
      *d Rear Seat RH Indicator

      Apply battery voltage to the telltale light assembly connector, and check that the telltale light assembly (seat belt warning light (for Rear)) indicator illuminates.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 10 (IG+)

      Battery negative (-) → Terminal 1(RLID)

      		 Rear seat LH indicator illuminates

      Battery positive (+) → Terminal 10 (IG+)

      Battery negative (-) → Terminal 2(RCID)

      		 Rear center seat indicator illuminates

      Battery positive (+) → Terminal 10 (IG+)

      Battery negative (-) → Terminal 3(RRID)

      		 Rear seat RH indicator illuminates

      If the result is not as specified, replace the telltale light assembly (seat belt warning light (for Rear)).