FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat) INSTALLATION

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH


    1. Install the front seat belt anchor plate.

    2. B003PFJC01
      *a Protruding Part

      Install the front seat inner belt assembly RH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

    3. Attach the wire harness clamp.

    4. B003J6WC01
      B003OFB Install in this Direction

      Close the cover as shown in the illustration.

    5. B003LGM

      Attach the wire harness clamp and connector clamp.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH


    1. Install the front seat belt anchor plate.

    2. B003S0IC01
      *a Protruding Part

      Install the front seat inner belt assembly LH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

    3. Attach the wire harness clamp.

    4. B003L8QC01
      B003OFB Install in this Direction

      Close the cover as shown in the illustration.

    5. B003RJA

      Attach the wire harness clamp and connector clamp.

    6. B003Q6R

      Install the band in the position shown in the illustration.

  3. INSTALL FRONT SEAT ASSEMBLY

    Click here