FRONT SEAT CUSHION HEATER(for Power Seat) REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures(adjustment, calibration, initialization, or registration) that must be per formed after parts are removed, installed, or replaced during the front seat cushion heater removal / installation are shown below.

Necessary Procedures after parts removed / installed / replaced
Replacement Part or Procedure Necessary Procedures Effects / Inoperative when not Performed Link
Disconnect cable from negative battery terminal

w/ Power Back Door System:

Reset back door close position

 Power back door system

Click here

CAUTION:


  • B003L4P

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for RHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  2. REMOVE FRONT SEAT HEADREST ASSEMBLY

    Click here

  3. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD RH

    Click here

  4. REMOVE FRONT SEAT CUSHION SHIELD RH

    Click here

  5. REMOVE FRONT SEAT INNER CUSHION SHIELD RH

    Click here

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

    Click here

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Front Passenger Side)

    Click here

  8. REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY RH

    Click here

  9. REMOVE SEAT CUSHION COVER WITH PAD

    Click here

  10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (FRONT SEAT CUSHION HEATER)


    1. B003MPV

      Remove the 2 hog rings and disconnect the 2 straps of the separate type front seat cushion cover (front seat cushion heater) from the separate type front seat cushion pad.

    2. B003ONP

      Remove the 18 hog rings and separate type front seat cushion cover (front seat cushion heater).