FRONT SEAT CUSHION HEATER(for Manual Seat) INSPECTION

PROCEDURE


  1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER (FRONT SEAT CUSHION HEATER)


    1. Check the separate type front seat cushion cover (front seat cushion heater).


      1. B003KAPC01
        *1 Connector A
        *2 Connector B
        *a

        Component without harness connected

        (Separate Type Front Seat Cushion Cover (Front Seat Cushion Heater))

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A-5 - B-1

        Seat cushion heater

        temperature 20°C (68°F)

        		 6.11 to 7.46 Ω
        A-6 - B-2
        A-5 - A-6
        B-1 - B-2

        Tech Tips

        If the result is not as specified, replace the separate type front seat cushion cover (front seat cushion heater).