FRONT SEATBACK HEATER(for Power Seat) REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures(adjustment, calibration, initialization, or registration) that must be per formed after parts are removed, installed, or replaced during the front seatback heater removal / installation are shown below.

Necessary Procedures after parts removed / installed / replaced
Replacement Part or Procedure Necessary Procedures Effects / Inoperative when not Performed Link
Disconnect cable from negative battery terminal

w/ Power Back Door System:

Reset back door close position

 Power back door system

Click here

CAUTION:


  • B003L4P

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for RHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  2. REMOVE FRONT SEAT HEADREST ASSEMBLY

    Click here

  3. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD RH

    Click here

  4. REMOVE FRONT SEAT CUSHION SHIELD RH

    Click here

  5. REMOVE FRONT SEAT INNER CUSHION SHIELD RH

    Click here

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

    Click here

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Front Passenger Side)

    Click here

  8. REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY RH

    Click here

  9. REMOVE FRONT NO. 1 SEATBACK HOOK

    Click here

  10. REMOVE FRONT SEAT HEADREST SUPPORT

    Click here

  11. REMOVE SEATBACK COVER WITH PAD

    Click here

  12. REMOVE SEPARATE TYPE FRONT SEATBACK COVER (FRONT SEATBACK HEATER)


    1. B003QJU

      Remove the 6 hog rings and separate type front seatback cover (front seatback heater).