CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the RH side.
PROCEDURE
INSTALL SEPARATE TYPE FRONT SEATBACK COVER (FRONT SEATBACK HEATER)
Tech Tips
Refer to the precautions on wrinkles to avoid creating any on the separate type front seatback cover when installing the seat cover.
As shown in the illustration, fix all of the cover seam allowances in the same direction.
Set the separate type front seatback cover (front seatback heater).
Using hog ring pliers, install the separate type front seatback cover (front seatback heater) with 6 new hog rings in the order shown in the illustration.
| *1 | Hog Ring Pliers | - | - |
| *a | Cutout | - | - |
Note
Do not dirty or damage the separate type front seatback cover.
Securely tighten the hog rings as shown in the illustration while making sure wrinkles do not form in the center of the fabric and separate type front seatback pad.
Tech Tips
Install the hog rings at the cutouts if they are there.
INSTALL SEATBACK COVER WITH PAD
INSTALL FRONT SEAT HEADREST SUPPORT
INSTALL FRONT NO. 1 SEATBACK HOOK
INSTALL FRONT SEATBACK FRAME SUB-ASSEMBLY RH
INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Driver Side)
INSTALL FRONT SEAT INNER CUSHION SHIELD LH (for Front Passenger Side)
INSTALL FRONT SEAT CUSHION SHIELD RH (for Driver Side)
INSTALL FRONT SEAT CUSHION SHIELD LH (for Front Passenger Side)
INSTALL VERTICAL ADJUSTING HANDLE RH (for Driver Side)
INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (for Driver Side)
INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Front Passenger Side)
INSTALL FRONT SEAT HEADREST ASSEMBLY
INSTALL FRONT SEAT ASSEMBLY RH
INSPECT SEAT HEATER SYSTEM