REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • B003L4P

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

PROCEDURE


  1. INSTALL REAR NO. 1 SEAT ASSEMBLY LH


    1. B003S8L

      Place the rear No. 1 seat assembly LH in the vehicle as shown in the illustration.

      Note

      Do not damage the rear No. 1 seat assembly LH, body exterior or interior parts.

    2. B003M9QN01

      With the rear No. 1 seat assembly LH in the tumble position, temporarily install the 2 hexagon bolts.

      Tech Tips

      Temporarily install the hexagon bolts with the part raised.

    3. Tighten the 2 nuts in the order shown in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }
    4. B003KTJ

      w/ Seat Belt Warning System:

      Connect the connector.

  2. INSTALL REAR SEAT OUTER CUSHION HINGE COVER LH


    1. B003L6D

      Attach the claw to install the rear seat outer cushion hinge cover LH.

  3. INSTALL REAR SEAT INNER CUSHION HINGE COVER LH


    1. B003NDO

      Attach the claw to install the rear seat inner cushion hinge cover LH.

  4. INSTALL REAR SEAT CUSHION HINGE COVER LH


    1. B003KPP

      Temporarily install the No. 1 seat leg sub-assembly LH with the bolt until it contacts the body.

    2. Fold the seat in the installation direction (1) and lock the rear seat lock assembly RH.

      Tech Tips

      Make sure it is securely locked.

      B003RWFC01
      B003OFB Install in this Direction (1) B003QYY Install in this Direction (2)

    3. Move the seatback of the rear No. 1 seat assembly LH in the installation direction (2) and lock it.

    4. B003NC8N01

      Tighten the bolts in the order shown in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }
    5. B003P11

      Attach the claw and guide to install the rear seat cushion hinge cover LH.

  5. INSTALL REAR SEAT CUSHION HINGE COVER LH


    1. B003O7F

      Attach the claw and guide to install the rear seat cushion hinge cover LH.