REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • B003L4P

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

  • Replace any other damaged parts as necessary.

PROCEDURE


  1. REMOVE REAR SEAT CUSHION HINGE COVER LH


    1. B003O7F

      Detach the claw and guide and remove the rear seat cushion hinge cover LH.

  2. REMOVE REAR SEAT CUSHION HINGE COVER LH


    1. B003P11

      Detach the claw and guide and remove the rear seat cushion hinge cover LH.

    2. B003NC8

      Remove the 2 bolts.

  3. REMOVE REAR SEAT INNER CUSHION HINGE COVER LH


    1. Operate the reclining adjuster release handle LH as shown in the illustration and fold down the seatback of the rear No. 1 seat assembly LH in the removal direction (1).

      B003P0PC01
      B003QBX Place Hand Here - -
      B003OFB Remove in this Direction (1) B003QYY Remove in this Direction (2)

    2. Place your hands at the position shown in the illustration and lift up the rear end of the seat in the removal direction (2) to set the rear No. 1 seat assembly LH in the tumble condition.

    3. B003NDO

      Detach the claw and remove the rear seat inner cushion hinge cover LH.

  4. REMOVE REAR SEAT OUTER CUSHION HINGE COVER LH


    1. B003L6D

      Detach the claw and remove the rear seat outer cushion hinge cover LH.

  5. REMOVE REAR NO. 1 SEAT ASSEMBLY LH


    1. B003KTJ

      Disconnect the connector.

    2. B003M9Q

      Remove the 2 nuts and rear No. 1 seat assembly LH.

    3. B003Q2Z

      Remove the rear No. 1 seat assembly LH as shown in the illustration.

      Note


      • Protect the front seat legs.


      • Do not damage the rear No. 1 seat assembly LH, body exterior or interior parts.