CAUTION / NOTICE / HINT
CAUTION:
Be sure to follow the correct removal and installation procedures of the horn button assembly.
PROCEDURE
INSPECT HORN BUTTON ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
for Type A:
for Type B:
Visually check for defects with the horn button assembly installed on the vehicle.
The defects are as follows:
Cuts on the surface and in the grooves of the horn button assembly
Small cracks on the surface and in the grooves of the horn button assembly
Significant discoloration on the surface and in the grooves of the horn button assembly
| OK |
|---|
| No defects are found. |
Tech Tips
If any of the defects is found, replace the horn button assembly with a new one.
INSPECT HORN BUTTON ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check.
for Type A:
for Type B:
Visually check for defects with the horn button assembly removed from the vehicle.
The defects are as follows:
Cuts on the surface and in the grooves of the horn button assembly
Small cracks on the surface and in the grooves of the horn button assembly
Significant discoloration on the surface and in the grooves of the horn button assembly
Cracks or other damage to the connector
Deformation of the steering wheel assembly
Deformation of the horn button contact plate of the horn button assembly
Interference or uneven clearance between the horn button assembly and steering wheel assembly when a new horn button assembly is installed on the steering wheel assembly
| OK |
|---|
| No defects are found. |
Tech Tips
If any of the defects is found, replace the horn button assembly or steering wheel assembly with a new one.