METER / GAUGE SYSTEM SYSTEM DESCRIPTION


  1. OUTLINE OF COMBINATION METER ASSEMBLY


    1. for TFT Display Type:

      B003NI0C01
      *a Example *b Tachometer
      *c Speedometer *d
      • Power Condition

      • ODO/TRIP Meter

      *e Engine Coolant Temperature Receiver Gauge *f Fuel Receiver Gauge
      *g

      Multi-information Display


      • Warning Message

      • LED Headlight Indicator Light (for LED Headlight)

      • Headlight Leveling Indicator Light (for LED Headlight)

      • Charging System Warning Light

      • Low Engine Oil Pressure Warning Light

      • Low Engine Oil Level Warning Light

      • Brake Override System Warning Light

      • Open Door Warning Light

      • Smart Entry and Start System Indicator Light (w/ Smart Entry and Start System)

      • A/T OIL TEMP Warning Light (for Automatic Transmission)

      • Fuel System Warning Light

      • TRC OFF Indicator Light

      • Four-wheel Drive Indicator Light

      • ECO Wallet

      • ECO Score

      • Drive Information

      *h

      Tab


      • Drive Information Tab

      • Navigation Tab (w/ Navigation System)

      • Audio Tab (w/ Audio and Visual System [for Radio and Display Type])

      • Cruise Control Operation Guide Tab

      • Message Tab

      • Setting Tab

      *i
      • Ambient Temperature

      • Icy Street Warning

      • Shift Indicator (for Automatic Transmission)

      • Cruise Control Indicator Light

      • SET Indicator Light

      • ECO MODE Indicator (w/ ECO MODE Indicator)

      • POWER MODE Indicator (w/ ECO MODE Indicator)

      *j Trip Switch
    2. for Dot Display Type:

      B003NXEC01
      *a Example *b Tachometer
      *c Speedometer *d ODO/TRIP Meter
      *e Engine Coolant Temperature Receiver Gauge *f Fuel Receiver Gauge
      *g

      Multi-information Display


      • Warning Message

      • Charging System Warning Light

      • Low Engine Oil Pressure Warning Light

      • Brake Override System Warning Light

      • Open Door Warning Light

      • TRC OFF Indicator Light

      • Four-wheel Drive Indicator Light

      • Ambient Temperature (for Automatic Air Conditioning System)

      • Icy Street Warning (for Automatic Air Conditioning System)

      • Drive Information

      *h Shift Indicator (for Automatic Transmission)
      *i Trip Switch - -
  2. INPUT AND OUTPUT SIGNALS OF COMBINATION METER ASSEMBLY

    Meter or Gauge
    Meter or Gauge Input/Output Communication Line Condition Signal Sender
    Speedometer Input CAN Gauge Vehicle speed signal Brake actuator assembly (skid control ECU)
    Direct line - Vehicle speed pulse input signal
    Output CAN - Vehicle speed signal Related ECUs
    Speed tolerance A signal ECM
    Speed tolerance B signal
    Direct line - Vehicle speed pulse input signal Related ECUs
    Tachometer Input CAN Gauge Engine speed signal ECM
    Fuel receiver gauge Input CAN Gauge Shift position signal ECM
    Starter signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Direct line Gauge Vehicle speed pulse input signal
    Fuel level signal Fuel sender gauge assembly
    Parking brake switch signal Parking brake switch assembly
    Output CAN - Main tank fuel level signal Related ECUs
    Fuel sender signal
    Engine coolant temperature receiver gauge Input CAN Gauge Engine coolant temperature signal ECM
    Warning or Indicator
    Warning or Indicator Input/Output Communication Line Condition Signal Sender
    Turn indicator light Input Direct line Blinks Turn signal switch signal Headlight dimmer switch assembly
    Hazard warning signal switch signal Clock assembly (hazard warning switch)
    CAN Blinks Hazard light activation request signal Brake actuator assembly (skid control ECU)
    Output CAN - Turn signal light operation signal Related ECUs
    Hazard warning signal switch signal
    Direct line - Turn signal switch signal Each turn signal light
    Hazard warning signal switch signal
    Front fog indicator light Input Direct line Turns on Front fog indicator light signal FR FOG relay
    Taillight indicator light Input Direct line Turns on Taillight signal TAIL relay
    High beam indicator light Input Direct line Turns on High beam indicator light Headlight dimmer switch assembly
    Smart entry and start system indicator light Input CAN Turns on / Blinks Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    Cruise control indicator light Input CAN Turns on Cruise control indicator signal ECM
    SET indicator light Input CAN Turns on SET indicator signal ECM
    Brake override system warning light Input CAN Turns on / Blinks Brake override system warning light request signal ECM
    Seat belt warning light Input Direct line Blinks Driver side seat belt buckle switch signal Front seat inner belt assembly RH
    Front passenger side seat belt buckle switch signal Front seat inner belt assembly LH
    Front passenger seat occupant detection sensor signal
    Parking brake warning light Input Direct line Turns on Parking brake switch signal Parking brake switch assembly
    Brake warning light Input CAN Turns on Brake warning light signal Brake actuator assembly (skid control ECU)
    Direct line Turns on Brake fluid level warning switch signal Brake master cylinder sub-assembly (brake fluid level warning switch)
    Vacuum warning switch signal Vacuum warning switch assembly
    SRS warning light Input CAN Turns on SRS warning light control request signal Airbag sensor assembly
    Charger system warning light Input CAN Turns on Charger system warning light signal ECM
    Low engine oil pressure warning light Input Direct line Turns on Engine oil pressure switch signal Engine oil pressure switch assembly
    A/T OIL TEMP warning light (for Automatic Transmission) Input CAN Turns on / Blinks A/T OIL TEMP warning mode ECM
    Engine speed signal
    Four-wheel drive indicator light Input CAN Turns on / Blinks Four-wheel drive indicator light request signal 4 wheel drive control ECU
    Low speed four-wheel drive indicator light Input CAN Turns on / Blinks Low speed four-wheel drive indicator light request signal 4 wheel drive control ECU
    Rear differential lock indicator (for 4WD) Input CAN Turns on / Blinks Rear differential lock indicator request signal 4 wheel drive control ECU
    MIL (Malfunction Indicator Lamp) Input CAN Turns on / Blinks MIL (Malfunction Indicator Lamp) request signal ECM
    Slip indicator light Input CAN Turns on / Blinks Slip indicator light signal Brake actuator assembly (skid control ECU)
    VSC indicator light Input CAN Turns on VSC indicator light signal Brake actuator assembly (skid control ECU)
    TRC OFF indicator light Input CAN Turns on TRC OFF indicator light signal Brake actuator assembly (skid control ECU)
    ABS warning light Input CAN Turns on / Blinks ABS warning light signal Brake actuator assembly (skid control ECU)
    Downhill assist control system indicator light (w/ Downhill Assist Control) Input CAN Turns on / Blinks Downhill assist control system indicator signal Brake actuator assembly (skid control ECU)
    GLOW indicator light Input CAN Turns on GLOW indicator light signal ECM
    Fuel system warning light Input CAN Turns on Fuel filter warning signal ECM
    Direct line Turns on / Blinks Level warning switch signal Level warning switch assembly
    Low engine oil level warning light Input CAN Turns on Engine speed signal ECM
    Engine coolant temperature signal
    Direct line Turns on Engine oil level signal Engine oil level sensor
    LED headlight indicator light (for LED Headlight) Input CAN Turns on LED headlight indicator light signal Headlight leveling ECU assembly
    Headlight leveling indicator light (for LED Headlight) Input CAN Turns on Headlight leveling indicator light signal Headlight leveling ECU assembly
    POWER MODE indicator light (w/ ECO MODE Indicator Light) Input CAN Turns on POWER MODE signal ECM
    ECO MODE indicator light (w/ ECO MODE Indicator Light) Input CAN Turns on ECO MODE signal ECM
    Eco driver indicator light Input CAN Turns on Ecology light indicator signal ECM
    Open door warning light Input Direct line Turns on Front door courtesy switch signal Front door courtesy switch assembly
    Rear door courtesy switch signal Rear door courtesy switch assembly
    Back door courtesy switch signal Back door lock assembly (back door courtesy light switch)
    Output CAN - Each door courtesy switch signal Related ECUs
    Direct line - Except driver side door courtesy switch signal Related ECUs
    Master warning light Input CAN / Direct line Turns on / Blinks Each warning signal Related ECUs
    Low fuel level warning light Input Direct line Turns on Fuel level signal Fuel sender gauge assembly
    Multi-information Display (for TFT Display Type)
    Item Input/Output Communication Line Condition Signal Sender
    Opening - - - - -
    Eco saving Input CAN Displayed Fuel consumption signal ECM
    Direct line Displayed Steering pad switch signal Steering pad switch assembly
    Vehicle speed pulse input signal Brake actuator assembly (skid control ECU)
    Fuel level signal Fuel sender gauge assembly
    Eco score Input CAN Displayed Eco zone display condition amount signal ECM
    Accelerator position signal
    SET indicator signal
    Shift P position signal
    Shift R position signal
    Shift N position signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Direct line Displayed Vehicle speed pulse input signal
    Back-up light switch signal Back-up light switch assembly (for Manual Transmission)
    Current fuel consumption Input CAN Displayed Fuel consumption signal ECM
    Engine speed signal
    Drivetrain information signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    Output CAN - Drive monitor unit signal 0 Related ECUs
    Drive monitor display signal (Current fuel consumption)
    Average fuel consumption (After refuel) Input CAN Displayed Fuel consumption signal ECM
    Engine speed signal
    Drivetrain information signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    Output CAN - Drive monitor unit signal 3 Related ECUs
    Drive monitor display signal (Average fuel consumption [After refuel])
    Average fuel consumption (After start) Input CAN Displayed Fuel consumption signal ECM
    Engine speed signal
    Drivetrain information signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    Output CAN - Drive monitor unit signal 7 Related ECUs
    Drive monitor display signal (Average fuel consumption [After start])
    Average fuel consumption (After reset) Input CAN Displayed Fuel consumption signal ECM
    Engine speed signal
    Drivetrain information signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    - Displayed Reset signal Trip switch
    Output CAN - Drive monitor unit signal 6 Related ECUs
    Drive monitor display signal (Average fuel consumption [After reset])
    Distance (Range) Input CAN Displayed Fuel consumption signal ECM
    Engine speed signal
    Drivetrain information signal
    Engine type information 1 signal
    Engine type information 2 signal
    Engine type information 3 signal
    Engine type information 4 signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    Output CAN - Drive monitor unit signal 4 Related ECUs
    Drive monitor display signal (Distance [Range])
    Average speed (After start) Input CAN Displayed Engine speed signal ECM
    Drivetrain information signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    Output CAN - Drive monitor unit signal 1 Related ECUs
    Drive monitor display signal (Average speed [After reset])
    Average speed (After reset) Input CAN Displayed Engine speed signal ECM
    Drivetrain information signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    - Displayed Reset signal Trip switch
    Elapsed time (After start) Input CAN Displayed Engine speed signal ECM
    Drivetrain information signal
    Output CAN - Drive monitor display signal (Average speed [After reset]) Related ECUs
    Elapsed time (After reset) Input CAN Displayed Engine speed signal ECM
    Drivetrain information signal
    - Displayed Reset signal Trip switch
    Output CAN - Drive monitor display signal (Elapsed time [After reset]) Related ECUs
    Distance (After start) Input CAN Displayed Engine speed signal ECM
    Drivetrain information signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    Output CAN - Drive monitor unit signal 2 Related ECUs
    Drive monitor display signal (Distance [After start])
    Eco driving indicator zone Input CAN Displayed Eco-zone indicator level signal ECM
    Other (Blank) - - - - -
    Outside temp Input Direct line Displayed Ambient temperature sensor input signal Thermistor assembly (ambient temperature sensor)
    Vehicle speed pulse input signal Brake actuator assembly (skid control ECU)
    Output CAN - Ambient temperature display signal Related ECUs
    Ambient temperature sensor data signal
    Icy street warning Input Direct line Displayed Ambient temperature data (display) signal Thermistor assembly (ambient temperature sensor)
    0 or 0.5 below decimal point of ambient temperature display switch signal
    Ambient temperature sensor input signal
    Drive information tab - - Displayed - -
    Navigation tab (w/ Navigation System) Input Local Bus Displayed Navigation signal Navigation receiver assembly
    Audio Tab (w/ Audio and Visual System [for Radio and Display Type]) Input Local Bus Displayed Audio signal Radio and display receiver assembly
    Navigation receiver assembly (w/ Navigation System)
    Cruise control operation guide tab Input CAN Displayed Cruise control operation guide signal ECM
    Message tab - - Displayed - -
    Setting tab - - Displayed - -
    Smart Entry & Start System malfunction See owner's manual (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Steering wheel lock Press engine switch while turning wheel Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Depress brake and then touch key to engine switch (for Automatic Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Depress clutch and then touch key to engine switch (for Manual Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Key not detected Check key location (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Depress brake and then start engine (for Automatic Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Depress clutch and then start engine (for Manual Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Key battery low (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Turn off vehicle (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Shift to P before exiting vehicle (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Power turned off to save battery (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Push and hold engine switch for emergency stop (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Shift to N and press engine switch to restart (for Automatic Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Depress clutch and press engine switch to restart (for Manual Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Key left inside vehicle (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    ACCESSORY (w/ Smart Entry and Start System) Input CAN Displayed Display request of vehicles mode signal Certification ECU (smart key ECU assembly)
    IGNITION ON (w/ Smart Entry and Start System) Input CAN Displayed Display request of vehicles mode signal Certification ECU (smart key ECU assembly)
    Low oil pressure Stop in a safe place See owner's manual Input Direct line Displayed Engine oil pressure signal Engine oil pressure switch assembly
    Engine oil level low Add or replace Input CAN Displayed Engine speed signal ECM
    Engine coolant temperature signal
    Direct line Displayed Engine oil level signal Engine oil level sensor
    Transmission fluid temp high See owner's manual (for Automatic Transmission) Input CAN Displayed A/T OIL TEMP warning mode ECM
    Engine speed signal
    Transmission system malfunction Visit your dealer (for Automatic Transmission) Input CAN Displayed A/T OIL TEMP warning mode ECM
    Engine speed signal
    Cruise control malfunction Visit your dealer Input CAN Displayed Cruise control indicator signal ECM
    Accelerator and brake pedals depressed simultaneously Input CAN Displayed Brake override system warning light request signal ECM
    Brake override malfunction Visit your dealer Input CAN Displayed Brake override system warning light request signal ECM
    Check Engine Reduced engine power Visit your dealer Input CAN Displayed MIL (Malfunction Indicator Lamp) request signal ECM
    Check Engine Visit your dealer Input CAN Displayed MIL (Malfunction Indicator Lamp) request signal ECM
    Reduced engine power Visit your dealer Input CAN Displayed MIL (Malfunction Indicator Lamp) request signal ECM
    Engine maintenance required Visit your dealer Input CAN Displayed MIL (Malfunction Indicator Lamp) request signal ECM
    Replace fuel filter Input CAN Displayed Fuel filter warning signal ECM
    Water accumulation in fuel filter See owner's manual Input Direct line Displayed Level warning switch signal Level warning switch
    Headlight system malfunction Visit your dealer (for LED Headlight) Input CAN Displayed LED headlight indicator light signal Headlight leveling ECU assembly
    Headlight leveling indicator light
    2WD-4WD mode change malfunction visit your dealer Input CAN Displayed Four-wheel drive indicator light request signal 4 wheel drive control ECU
    Differential oil temp high Cooling time required Input CAN Displayed Four-wheel drive indicator light request signal 4 wheel drive control ECU
    Differential oil temp high Shift to 2WD mode Cooling time required Input CAN Displayed Four-wheel drive indicator light request signal 4 wheel drive control ECU
    TRC turned off Input CAN Displayed TRC OFF indicator light signal Brake actuator assembly (skid control ECU)
    Multi-information Display (for Dot Display Type)
    Item Input/Output Communication Line Condition Signal Sender
    OPENING - - - - -
    ENDING - - - - -
    OTHER (BLANK) - - - - -
    CURRENT FUEL CONSUMPTION Input CAN Displayed Fuel consumption signal ECM
    Engine speed signal
    Drivetrain information signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    Output CAN - Drive monitor unit signal 0 Related ECUs
    Drive monitor display signal (Current fuel consumption)
    AVERAGE FUEL CONSUMPTION (AFTER RESET) Input CAN Displayed Fuel consumption signal ECM
    Engine speed signal
    Drivetrain information signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    - Displayed Reset signal Trip switch
    Output CAN - Drive monitor unit signal 6 Related ECUs
    Drive monitor display signal (Average fuel consumption [After reset])
    DISTANCE (RANGE) Input CAN Displayed Fuel consumption signal ECM
    Engine speed signal
    Drivetrain information signal
    Engine type information 1 signal
    Engine type information 2 signal
    Engine type information 3 signal
    Engine type information 4 signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    Output CAN - Drive monitor unit signal 4 Related ECUs
    Drive monitor display signal (Distance [Range])
    AVERAGE SPEED (AFTER RESET) Input CAN Displayed Engine speed signal ECM
    Drivetrain information signal
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Vehicle speed pulse signal integrated value signal
    Direct line Displayed Vehicle speed pulse input signal
    - Displayed Reset signal Trip switch
    ELAPSED TIME (AFTER RESET) Input CAN Displayed Engine speed signal ECM
    Drivetrain information signal
    - Displayed Reset signal Trip switch
    Output CAN - Drive monitor display signal (Elapsed time [After reset]) Related ECUs
    ECO DRIVING INDICATOR ZONE Input CAN Displayed Eco-zone indicator level signal ECM
    SETTING - - Displayed - -
    DRIVE INFORMATION - - Displayed - -
    OUTSIDE TEMP (for Automatic Air Conditioning System) Input Direct line Displayed Ambient temperature sensor input signal Thermistor assembly (ambient temperature sensor)
    Vehicle speed pulse input signal Brake actuator assembly (skid control ECU)
    Output CAN - Ambient temperature display signal Related ECUs
    Ambient temperature sensor data signal
    ICY STREET WARNING (for Automatic Air Conditioning System) Input Direct line Displayed Ambient temperature data (display) signal Thermistor assembly (ambient temperature sensor)
    0 or 0.5 below decimal point of ambient temperature display switch signal
    Ambient temperature sensor input signal
    ACCELERATOR AND BRAKE PEDALS DEPRESSED SIMULTANEOUSLY Input CAN Displayed Brake override system warning light request signal ECM
    BRAKE OVERRIDE MALFUNCTION VISIT YOUR DEALER Input CAN Displayed Brake override system warning light request signal ECM
    CHECK ENGINE REDUCED ENGINE POWER VISIT YOUR DEALER Input CAN Displayed MIL (Malfunction Indicator Lamp) request signal ECM
    CHECK ENGINE VISIT YOUR DEALER Input CAN Displayed MIL (Malfunction Indicator Lamp) request signal ECM
    REDUCED ENGINE POWER VISIT YOUR DEALER Input CAN Displayed MIL (Malfunction Indicator Lamp) request signal ECM
    ENGINE MAINTENANCE REQUIRED VISIT YOUR DEALER Input CAN Displayed MIL (Malfunction Indicator Lamp) request signal ECM
    REPLACE FUEL FILTER Input CAN Displayed Fuel filter warning signal ECM
    WATER ACCUMULATION IN FUEL FILTER SEE OWNER'S MANUAL Input Direct line Displayed Level warning switch signal Level warning switch assembly
    2WD-4WD MODE CHANGE MALFUNCTION VISIT YOUR DEALER Input CAN Displayed Four-wheel drive indicator light request signal 4 wheel drive control ECU
    DIFFERENTIAL OIL TEMP HIGH COOLING TIME REQUIRED Input CAN Displayed Four-wheel drive indicator light request signal 4 wheel drive control ECU
    DIFFERENTIAL OIL TEMP HIGH SHIFT TO 2WD MODE COOLING TIME REQUIRED Input CAN Displayed Four-wheel drive indicator light request signal 4 wheel drive control ECU
    TRC TURNED OFF Input CAN Displayed TRC OFF indicator light signal Brake actuator assembly (skid control ECU)
    SMART ENTRY & START SYSTEM MALFUNCTION SEE OWNER'S MANUAL (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    STEERING WHEEL LOCK PRESS ENGINE SWITCH WHILE TURNING WHEEL (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    DEPRESS BRAKE AND THEN TOUCH KEY TO ENGINE SWITCH (for Automatic Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    DEPRESS CLUTCH AND THEN TOUCH KEY TO ENGINE SWITCH (for Manual Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    KEY NOT DETECTED CHECK KEY LOCATION (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    DEPRESS BRAKE AND THEN START ENGINE (for Automatic Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    DEPRESS CLUTCH AND THEN START ENGINE (for Manual Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    KEY BATTERY LOW (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    TURN OFF VEHICLE (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    SHIFT TO P BEFORE EXITING VEHICLE (for Automatic Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    POWER TURNED OFF TO SAVE BATTERY (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    PUSH AND HOLD ENGINE SWITCH FOR EMERGENCY STOP (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    SHIFT TO N AND PRESS ENGINE SWITCH TO RESTART (for Automatic Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    DEPRESS CLUTCH AND PRESS ENGINE SWITCH TO RESTART (for Manual Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    KEY LEFT INSIDE VEHICLE (w/ Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    DEPRESS BRAKE AND THEN START ENGINE (for Automatic Transmission with Smart Entry and Start System) Input CAN Displayed Smart entry and start system warning signal Certification ECU (smart key ECU assembly)
    ACCESSORY (w/ Smart Entry and Start System) Input CAN Displayed Display request of vehicles mode signal Certification ECU (smart key ECU assembly)
    IGNITION ON (w/ Smart Entry and Start System) Input CAN Displayed Display request of vehicles mode signal Certification ECU (smart key ECU assembly)
    Buzzer
    Item Input/Output Communication Line Condition Communication Signal Sender
    Manual transmission reverse buzzer (for Manual Transmission) Input Direct line Sounds once Shift R position signal ECM
    Vehicle stability control sideways sliding warning buzzer Input CAN Sounds intermittently Buzzer control flag signal Brake actuator assembly (skid control ECU)
    Temperature warning/CRAWL cancel warning buzzer Input CAN Sounds intermittently Buzzer control flag signal Brake actuator assembly (skid control ECU)
    Brake system temperature rise/Active Test Input CAN Sounds intermittently Buzzer control flag signal Brake actuator assembly (skid control ECU)
    Brake system low braking force warning buzzer Input CAN Sounds intermittently Buzzer control flag signal Brake actuator assembly (skid control ECU)
    Seat belt warning buzzer Input Direct line Sounds intermittently Driver side seat belt buckle switch signal Front seat inner belt assembly RH
    Front passenger side seat belt buckle switch signal Front seat inner belt assembly LH
    Rear LH seat belt buckle switch signal Rear seat inner belt assembly LH
    Rear center seat belt buckle switch signal
    Rear RH seat belt buckle switch signal Rear seat inner belt assembly RH
    Front door courtesy switch signal Front door courtesy switch assembly
    Rear door courtesy switch signal Rear door courtesy switch assembly
    Back door courtesy switch signal Back door lock assembly (back door courtesy light switch)
    Parking brake switch signal Parking brake switch assembly
    Vehicle speed pulse input signal Brake actuator assembly (skid control ECU)
    Input CAN Sounds intermittently Vehicle speed signal
    Shift P position signal (for Automatic Transmission) ECM
    Shift R position signal
    Brake fluid low warning buzzer Input Direct line Sounds intermittently Brake fluid level warning switch signal Brake master cylinder sub-assembly (brake fluid level warning switch)
    Vehicle speed pulse input signal Brake actuator assembly (skid control ECU)
    CAN Sounds intermittently Vehicle speed signal
    Engine oil pressure warning buzzer Input CAN Sounds intermittently Engine speed signal ECM
    Vehicle speed signal Brake actuator assembly (skid control ECU)
    Direct line Sounds intermittently Vehicle speed pulse input signal
    Engine oil pressure switch signal Engine oil pressure switch assembly
    4WD warning buzzer Input CAN Sounds intermittently Buzzer control flag signal 4 wheel drive control ECU
    3 Sounds continuously
    Front differential oil temperature warning buzzer Input CAN Sounds intermittently Buzzer control flag signal 4 wheel drive control ECU
    Door open while not in P warning buzzer (w/ Smart Entry and Start System) Input CAN Sounds continuously Meter buzzer intermittence request signal Certification ECU (smart key ECU assembly)
    Smart entry and start system warning buzzer (w/ Smart Entry and Start System) Input CAN Sounds intermittently Meter buzzer intermittence request signal Certification ECU (smart key ECU assembly)
    Sounds intermittently (maximum: 9 times)
    Sounds once
    Engine switch operation while driving warning buzzer (w/ Smart Entry and Start System) Input CAN Sounds intermittently Engine switch operation buzzer intermittence request signal Certification ECU (smart key ECU assembly)
    Restart while driving notification buzzer (w/ Smart Entry and Start System) Input CAN Sounds continuously Smart entry and start system warning request signal Certification ECU (smart key ECU assembly)
    Immobiliser certification buzzer (w/ Smart Entry and Start System) Input CAN Sounds once Immobiliser key identification completion signal Certification ECU (smart key ECU assembly)
    PKB-ON driving warning buzzer Input Direct line Sounds intermittently Parking brake switch signal Parking brake switch assembly
    Vehicle speed pulse input signal Brake actuator assembly (skid control ECU)
    Driving with door ajar warning buzzer Input Direct line Sounds intermittently Front door courtesy switch signal Front door courtesy switch assembly
    Rear door courtesy switch signal Rear door courtesy switch assembly
    Vehicle speed pulse input signal Brake actuator assembly (skid control ECU)
    Fuel system warning buzzer Input Direct line Sounds continuously Level warning switch signal Level warning switch assembly
    Sports shift reject buzzer (for Automatic Transmission) Input Direct line Sounds twice Reject buzzer signal ECM
    Light reminder warning buzzer Input Direct line Sounds continuously Front door courtesy switch signal Front door courtesy switch assembly
    Headlight signal TAIL relay
    MIL (Malfunction Indicator Lamp) buzzer Input CAN Sounds once MIL (Malfunction Indicator Lamp) request signal ECM
    Engine display ID1 signal
    Engine maintenance notification signal
    Turn signal flasher buzzer Input Direct line Sounds intermittently Turn signal switch signal Headlight dimmer switch assembly
    Hazard warning signal switch signal Hazard warning switch assembly
    Multi-information display warning buzzer Input CAN / Direct line Sounds once Multi-information display warning signal Related ECUs
    Other
    Item Input/Output Communication Line Condition Communication Signal Sender
    ODO/TRIP meter Input CAN Displayed Vehicle speed pulse signal integrated value signal Brake actuator assembly (skid control ECU)
    Vehicle speed signal
    Direct line Displayed Vehicle speed pulse input signal
    ODO/TRIP change switch signal Trip switch
    Output CAN - Odometer signal Related ECUs
    Odometer unit signal
    TRIP A signal
    TRIP B signal
    Shift indicator (for Automatic Transmission) Input CAN Displayed Shift P position signal ECM
    Shift R position signal
    Shift N position signal
    Shift D position signal
    Shift gear signal
    Mode indicator signal
    Sports mode enable signal
    Transmission oil temperature range signal
    Diagnostic trouble code Input CAN Displayed Diagnostic trouble code signal Related ECUs
    Test mode signal ECM
    ABS warning light signal Brake actuator assembly (skid control ECU)
    Slip indicator light signal
    SRS warning light signal Airbag sensor assembly
  3. MULTI-INFORMATION DISPLAY


    1. Drive monitor (for TFT Display Type)


      1. The information displayed changes in the following order each time the steering pad switch is pressed.

        B003JVBC01
        *1 Drive Information 1 *2 Drive Information 2
        *3
        • Eco Driving Indicator Zone

        • Eco Score

        *4 Eco Saving
        *5 Other (Blank) - -
        *a Example - -
    2. Drive monitor (for Dot Display Type)


      1. The information displayed changes in the following order each time the DISP switch is pressed.

        B003JEZC01
        *1 CURRENT FUEL CONSUMPTION *2 AVERAGE FUEL CONSUMPTION (AFTER RESET)
        *3 DISTANCE (RANGE) *4 AVERAGE SPEED (AFTER RESET)
        *5 ELAPSED TIME (AFTER RESET) *6 ECO DRIVING INDICATOR ZONE
        *7 SETTING *8 OTHER (BLANK)
        *a Example - -