DOOR COURTESY LIGHT(for Rear Door) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE COURTESY LIGHT ASSEMBLY


    1. B003S94C01
      *a Protective Tape

      Put protective tape around the courtesy light assembly.

    2. B003Q9PC01
      *a Protective Tape
      B003QBX Insert Thin-bladed Screwdriver Here
      B003OFB Remove in this Direction

      Insert a thin-bladed screwdriver at the position shown in the illustration and detach the claw and guide.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

    3. Disconnect the connector and remove the courtesy light assembly.