ROOM LIGHT(for Rear) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY


    1. B003MCBC01
      *a Protective Tape
      B003QBX Insert Thin-bladed Screwdriver Here
      B003OFB Remove in this Direction

      Insert a thin-bladed screwdriver at the position shown in the illustration, detach the claw and remove the No. 1 room light lens.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

    2. B003JFBC01
      B003QBX Place Finger Here
      B003OFB Remove in this Direction

      Place your finger at the position shown in the illustration and pull as shown to detach the claw.

    3. B003KKOC01
      *a Protective Tape

      Using a screwdriver, detach the claw and remove the No. 1 room light assembly from the No. 1 room light switch base.

      Tech Tips

      Tape the screwdriver tip before use.