PROCEDURE
INSTALL BACK DOOR LOCK ASSEMBLY (BACK DOOR COURTESY SWITCH) (w/ Power Back Door)
Note
When installing a new back door lock assembly (back door courtesy switch), if there is any tape stuck to it, remove the tape.
When installing a new back door lock assembly (back door courtesy switch), if there are any strings attached to it, cut the strings off.
Do not allow grease or dust to adhere to the door lock wiring harness seal surface of the connector.
Apply MP grease to the sliding parts of the back door lock assembly (back door courtesy switch).
|
Bolt |
|
Connector |
|
Install in this Direction |
Install the back door lock assembly (back door courtesy switch) with the 4 bolts.
Connect the connectors.
INSTALL BACK DOOR LOCK ASSEMBLY (BACK DOOR COURTESY SWITCH) (w/o Power Back Door)
Note
When installing a new back door lock assembly (back door courtesy switch), if there is any tape stuck to it, remove the tape.
When installing a new back door lock assembly (back door courtesy switch), if there are any strings attached to it, cut the strings off.
Do not allow grease or dust to adhere to the door lock wiring harness seal surface of the connector.
Apply MP grease to the sliding parts of the back door lock assembly (back door courtesy switch).
|
Bolt |
|
Connector |
|
Install in this Direction |
Install the back door lock assembly (back door courtesy switch) with the 3 bolts.
Connect the connector.
INSTALL MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)
INSTALL BACK DOOR TRIM BOARD ASSEMBLY
INSTALL DOOR PULL HANDLE
INSTALL BACK DOOR SIDE GARNISH LH
INSTALL BACK DOOR SIDE GARNISH RH
INSTALL CENTER BACK DOOR GARNISH
INSPECT POWER BACK DOOR SYSTEM (w/ Power Back Door)
INSPECT BACK DOOR CLOSER SYSTEM (w/ Easy Closer)