PERSONAL LIGHT(for LED Type) REMOVAL

PROCEDURE


  1. REMOVE MAP LIGHT ASSEMBLY (PERSONAL LIGHT)


    1. B003P8RC01
      B003QBX Insert Moulding Remover D Here
      B003OFB Remove in this Direction

      Insert moulding remover D at the position shown in the illustration and pull as shown to detach the clip.

    2. B003N7GC01
      B003QBX Place Hands Here
      B003OFB Remove in this Direction

      Place your hands in the gap created during the above procedure and pull down to detach the clip as shown in the illustration.

    3. Disconnect the connector and remove the map light assembly (personal light).