VANITY LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISCONNECT VANITY LIGHT ASSEMBLY


    1. B003QZJC03
      *a Protective Tape
      B003OFB Remove in this Direction

      Using a thin-bladed screwdriver, detach the claw and guide and disconnect the vanity light assembly.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

  2. REMOVE VANITY LIGHT BULB


    1. B003K6LC02
      B003OFB Remove in this Direction

      Remove the vanity light bulb from the vanity light bulb holder.

  3. INSTALL VANITY LIGHT BULB


    1. B003LJBC02
      B003OFB Install in this Direction

      Install the vanity light bulb to the vanity light bulb holder.

  4. CONNECT VANITY LIGHT ASSEMBLY


    1. B003LRAC02
      B003OFB Install in this Direction

      Attach the guide and claw to connect the vanity light assembly.