VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. B003QZJC03
      *a Protective Tape
      B003OFB Remove in this Direction

      Using a thin-bladed screwdriver, detach the claw and guide.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

    2. B003QZYC01
      B003OFB Remove in this Direction

      Detach the claw and remove the vanity light assembly as shown in the illustration.

  2. REMOVE VANITY LIGHT BULB


    1. B003S8XC03
      B003OFB Remove in this Direction

      Remove the vanity light bulb from the vanity light bulb holder as shown in the illustration.