ROOM LIGHT(for Center) REMOVAL

PROCEDURE

1. REMOVE SPOT LIGHT ASSEMBLY (ROOM LIGHT)

   
   

   1. for LED Type:

      
      

      1. 

         *a	Protective Tape
         	Insert Thin-bladed Screwdriver Here
         	Remove in this Direction

         Insert a thin-bladed screwdriver at the position shown in the illustration, detach the claw and remove the spot light lens.

         Tech Tips

         Tape the thin-bladed screwdriver tip before use.

      2. 

         	Place Fingers Here
         	Remove in this Direction

         Place your fingers at the position shown in the illustration and detach the clip and guide.

      3. Disconnect the connector and remove the spot light assembly (room light).

   2. for Bulb Type, for Manual Air Conditioning System:

      
      

      1. 

         *a	Protective Tape
         	Insert Thin-bladed Screwdriver Here
         	Remove in this Direction

         Insert a thin-bladed screwdriver at the position shown in the illustration, detach the claw and remove the spot light lens.

         Tech Tips

         Tape the thin-bladed screwdriver tip before use.

      2. 

         	Place Fingers Here
         	Remove in this Direction

         Place your fingers at the position shown in the illustration and detach the clip and guide.

      3. 

         *a	Protective Tape

         Using a screwdriver, detach the claw and remove the spot light assembly (room light) from the spot light switch base.

         Tech Tips

         Tape the screwdriver tip before use.

   3. for Bulb Type, for Automatic Air Conditioning System:

      
      

      1. 

         *a	Protective Tape
         	Insert Thin-bladed Screwdriver Here
         	Remove in this Direction

         Insert a thin-bladed screwdriver at the position shown in the illustration, detach the claw and remove the spot light lens.

         Tech Tips

         Tape the thin-bladed screwdriver tip before use.

      2. 

         	Place Fingers Here
         	Remove in this Direction

         Place your fingers at the position shown in the illustration and detach the clip and guide.

      3. 

         *a	Protective Tape

         Using a screwdriver, detach the claw and remove the spot light assembly (room light) from the spot light switch base.

         Tech Tips

         Tape the screwdriver tip before use.