ENTRY LOCK AND UNLOCK SWITCH INSPECTION

PROCEDURE


  1. INSPECT FRONT DOOR OUTSIDE HANDLE ASSEMBLY RH


    1. B003KO4C01
      *a

      Component without harness connected

      (Front Door Outside Handle Assembly RH)
      *b Pushed
      *c Not Pushed
      *d Trigger Switch

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 (TRG+) - 4 (TRG-) Pushed Below 1 Ω
        1 (TRG+) - 4 (TRG-) Not pushed 10 kΩ or higher

        If the result is not as specified, replace the front door outside handle assembly RH.