ELECTRICAL KEY OSCILLATOR(for Instrument Panel Side) INSTALLATION

PROCEDURE

1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   Note

   Do not reuse dropped or damaged parts.

   
   

   1. 

      Attach the clamp and install No. 1 indoor electrical key antenna assembly.

   2. Connect the connector.

2. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)

   Click here

3. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)

   Click here

4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)

   Click here

5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

6. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

7. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

8. INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH

   Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here