TRANSPONDER KEY AMPLIFIER REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here

B003QQS

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE STEERING COLUMN LOWER COVER

    Click here

  4. REMOVE STEERING COLUMN UPPER COVER

    Click here

  5. REMOVE TRANSPONDER KEY COIL


    1. B003JHCC01
      B003OFB Remove in this Direction

      Using a screwdriver, widen the claw attached to the upper bracket by approximately 1.0 mm (0.039 in.).

    2. Pull out the transponder key coil with the claws open.

    3. Disconnect the connector and transponder key coil.