HEADLIGHT ASSEMBLY(for Halogen Headlight) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    Click here

  2. REMOVE HEADLIGHT ASSEMBLY LH

    B003KKXC01
    B003KT0 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Remove the bolt and 3 screws.

    3. B003KXVC01
      B003QBX Place Hands Here
      B003OFB Remove in this Direction

      Place your hands at the location shown in the illustration, and disconnect the bracket from the seat of the screw.

      Note

      Be careful not to break the bracket.

    4. Pull the headlight assembly LH forward to remove it.

    5. B003QL4

      Disconnect the 4 connectors and detach the 3 wire harness clamps.