SMART ENTRY AND START SYSTEM(for Start Function) DTC CHECK / CLEAR

Note

When using the GTS with the engine switch off, connect the GTS to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins. Then select the Model Code "KEY REGIST" under manual mode and enter the following menus: Body Electrical / Entry&Start(CAN). While using the GTS, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.

CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [POWER SOURCE CONTROL])
1. Connect the GTS to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
5. Check for DTCs.
  
  Body Electrical > Power Source Control > Trouble Codes
  
  Tech Tips
  
  Refer to the GTS operator's manual for further details.
CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [STARTING CONTROL])
1. Connect the GTS to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Starting Control / Trouble Codes.
5. Check for DTCs.
  
  Body Electrical > Starting Control > Trouble Codes
  
  Tech Tips
  
  Refer to the GTS operator's manual for further details.
CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [ENTRY&START])
1. Connect the GTS to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Entry&Start / Trouble Codes.
5. Check for DTCs.
  
  Body Electrical > Entry&Start > Trouble Codes
  
  Tech Tips
  
  Refer to the GTS operator's manual for further details.
CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [POWER SOURCE CONTROL])
1. Connect the GTS to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
5. Clear the DTCs by following the directions on the GTS display.
  
  Body Electrical > Power Source Control > Clear DTCs
  
  Tech Tips
  
  Refer to the GTS operator's manual for further details.
CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [STARTING CONTROL])
1. Connect the GTS to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Starting Control / Trouble Codes.
5. Clear the DTCs by following the directions on the GTS display.
  
  Body Electrical > Starting Control > Clear DTCs
  
  Tech Tips
  
  Refer to the GTS operator's manual for further details.
CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [ENTRY&START])
1. Connect the GTS to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Body Electrical / Entry&Start / Trouble Codes.
5. Clear the DTCs by following the directions on the GTS display.
  
  Body Electrical > Entry&Start > Clear DTCs
  
  Tech Tips
  
  Refer to the GTS operator's manual for further details.