SMART ENTRY AND START SYSTEM(for Entry Function) SYSTEM DIAGRAM


  1. for Entry Function

    B003JXCE03
    B003N9JE03
    B003J5UE05
    Component Function
    Front door outside handle assembly RH/LH

    Receives request signals from the certification ECU (smart key ECU assembly) via the built-in electrical key antenna (front door) and forms the vehicle exterior detection area.

    Uses the built-in trigger switch to detect the operation of the front door outside handle assembly and sends signals to the certification ECU (smart key ECU assembly).

    No. 1 indoor electrical key antenna assembly (front floor)

    No. 2 indoor electrical key antenna assembly (rear floor)

    No. 2 indoor electrical key antenna assembly (inside luggage)

    		 Receives the request code from the certification ECU (smart key ECU assembly) and forms the vehicle interior detection area.
    No. 2 indoor electrical key antenna assembly (back door) Receives the request code from the certification ECU (smart key ECU assembly) and forms the back door exterior detection area.
    Back door opener switch assembly Sends switch operation signals to the certification ECU (smart key ECU assembly).
    Door control receiver Receives the smart entry and start system code/wireless code sent from the electrical key transmitter sub-assembly.
    Combination meter assembly Blinks the hazard warning lights when performing answer-back in accordance with commands from the instrument panel junction block assembly (body ECU) sent through the combination meter assembly via direct line.
    Wireless door lock buzzer Sounds when warning functions operate in accordance with certification ECU (smart key ECU assembly) control.
    Electrical key transmitter sub-assembly Sends the ID code upon receiving a request signal.
    Certification ECU (smart key ECU assembly)

    Sends request codes to each indoor electrical key antenna assembly. Distinguishes and verifies the ID code from the electrical key transmitter sub-assembly and sends signals to each ECU in response to operated functions (controls entire system).

    Performs encryption code communication with the steering lock ECU (steering lock actuator assembly) and ID code box (immobiliser code ECU)* when ignition operations are performed.

    *: w/ ID Code Box (Immobiliser Code ECU)

  2. for Wireless Function

    Click here

  3. for Power Door Lock Function

    Click here