TRANSMITTER BATTERY(w/o Smart Entry and Start System) REPLACEMENT

PROCEDURE


  1. REMOVE TRANSMITTER HOUSING COVER

    Note

    Take extra care when handling these precision electronic components.


    1. B003RSZC01
      B003KT0 Protective Tape
      B003OFB Remove in this Direction

      Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE DOOR CONTROL TRANSMITTER PACKING


    1. B003JG4C01
      B003KT0 Protective Tape
      B003OFB Remove in this Direction

      Insert a precision screwdriver into the door control transmitter packing and turn the screwdriver to remove the door control transmitter packing.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE TRANSMITTER BATTERY


    1. B003O4SC01
      B003KT0 Protective Tape
      B003OFB Remove in this Direction

      Insert a precision screwdriver into the gap and gently remove the transmitter battery.

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery as the terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      Tech Tips

      Tape the screwdriver tip before use.

  4. INSTALL TRANSMITTER BATTERY


    1. B003K86C01
      B003OFB Install in this Direction

      Install a new transmitter battery (lithium battery: CR1620) with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during installation.

      • Keep the inside of the transmitter housing cover free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

  5. INSTALL DOOR CONTROL TRANSMITTER PACKING


    1. B003Q2QC02
      B003OFB Install in this Direction

      Install the door control transmitter packing by pressing down on it as shown in the illustration.

  6. INSTALL TRANSMITTER HOUSING COVER


    1. B003PAGC01
      B003OFB Install in this Direction

      Install the transmitter housing cover as shown in the illustration.