WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Entry and Start System) PRECAUTION


  1. PRECAUTIONS WHEN USING GTS


    1. When using the GTS with the vehicle engine switch off, connect the GTS to the vehicle and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins. Then select the Model Code "KEY REGIST" under manual mode and enter the following menus: Body Electrical / Entry&Start(CAN). While using the GTS, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.

    2. After all DTCs are cleared, check if the malfunction occurs again 6 seconds after the engine switch is turned on (IG).

  2. PRECAUTION WHEN REPLACING CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


    1. Before replacing the certification ECU (smart key ECU assembly), refer to the Service Bulletin.

  3. PRECAUTIONS FOR ELECTRICAL KEY TRANSMITTER SUB-ASSEMBLY


    1. The electrical key transmitter sub-assembly is a precision instrument. Be sure to observe the following:


      1. Do not subject the electrical key transmitter sub-assembly to strong physical shocks.

      2. Do not keep the electrical key transmitter sub-assembly in a high temperature area for a long time.

      3. Do not use an ultrasonic washing machine to clean the electrical key transmitter sub-assembly.

      4. Do not use the electrical key transmitter sub-assembly near any magnets or magnetized items.

      5. Do not place the electrical key transmitter sub-assembly near magnetic equipment, such as digital audio players, induction cookers, medical devices that generate low-frequency electromagnetic waves, etc.

      6. Do not attach any stickers to the electrical key transmitter sub-assembly.

      7. Do not disassemble the electrical key transmitter sub-assemblies.

      8. The mechanical key should only be used in an emergency, such as when the transmitter battery is depleted.