ULTRASONIC SENSOR INSTALLATION

PROCEDURE

1. INSTALL NO. 1 ULTRASONIC SENSOR

   Tech Tips

   Use the same procedure for both No. 1 ultrasonic sensors.

   
   

   1. 

      	Install in this Direction (1)
      	Install in this Direction (2)

      Attach the claw as shown in the illustration to install the No. 1 ultrasonic sensor.

      Note

      
      

      • Be careful of connector direction when inserting the sensor connector.

      • Don`t damage the bumper when inserting the sensor connector.

   2. Connect the 2 connectors.

      Note

      
      

      • Push the sensor perpendicularly to the bumper with the palm of the hand.

      • Pay attention not to damage the sensor.

      • Approach the wire harness connector straight to the sensor connector.

      Tech Tips

      
      

      • When connecting the wire harness to the sonar sensor,hold the sensor from bumper surface.

      • After connecting the wire harness to the sonar sensor, push the sensor from the bumper surface.

      

2. INSTALL REAR BUMPER COVER

   Click here