TOYOTA PARKING ASSIST-SENSOR SYSTEM PRECAUTION

IGNITION SWITCH EXPRESSIONS

1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

   Expression	Ignition Switch (Position)	Engine Switch (Condition)
   Ignition Switch off	LOCK	Off (Lock)
   Ignition Switch ACC	ACC	On (ACC)
   Ignition Switch ON	ON	On (IG)
   Engine Start	START	On (Start)

PRECAUTIONS FOR TOYOTA PARKING ASSIST-SENSOR SYSTEM

1. Under the following conditions, the detection function may not function properly:

   
   

   1. A sensor is covered with foreign matter, such as mud or snow (detection function returns to normal when the sensor is cleaned).

   2. A sensor is frozen (detection function returns to normal when the temperature of the sensor rises).

   3. A hand is blocking a sensor.

      Tech Tips

      
      

      • In very cold weather when the clearance warning buzzer sounds, the sensors may not be able to detect obstacles.

      • If the clearance warning buzzer sounds, visually check the sensors first. If the sensors are free of foreign matter but the clearance warning buzzer continues to sound, a sensor may have a malfunction.

2. The detection range may be affected by the following conditions:

   
   

   1. A sensor is covered with foreign matter, such as mud or snow.

   2. The vehicle is in an excessively hot or excessively cold area.

3. Under the following conditions, a detection error may occur:

   
   

   1. Driving on a bumpy road, a slope, an unpaved road or in tall grass.

   2. Ultrasonic waves are received from the horn or parking sonar system of another vehicle, a motorcycle engine, or the air brakes of a large vehicle.

   3. It is raining heavily or the sensor is sprayed with water.

   4. The vehicle is tilted at a steep angle.

   5. The vehicle is equipped with a fender pole, a wireless antenna mechanism or fog lights.

   6. A sensor is covered with foreign matter, such as mud or snow.

   7. The vehicle is moving forward or backward towards high curbs or objects that are perpendicular to the ground.

   8. A sensor is sprayed with high pressure water or steam.

   9. A towing hitch is mounted on the vehicle.

   10. The sensor is covered by water on a flooded road.

   11. The detection range is reduced due to an object such as a sign.

   12. A suspension other than a TOYOTA genuine suspension is installed.

   13. A backlit license plate is installed.

4. The sensors cannot detect the following objects:

   
   

   1. Thin objects, such as wires and ropes

   2. Materials that absorb ultrasonic waves, such as cotton or snow.

   3. Objects with sharp edges

   4. Short objects

   5. Objects that are tall and protrude toward the vehicle above the detection range of the sensors.

   6. Moving objects such as people or animals.

      Tech Tips

      In particular, people may also not be detected depending on the type of clothing they are wearing. Always visually check the area.

5. Other notices:

   
   

   1. The sensors cannot detect objects directly under the bumper. (A sensor may detect low objects and thin poles, and then lose track of them.)

   2. Be aware that the detection range of this system is limited. In certain conditions, some objects may not be detected. Always make sure to check all around the vehicle when driving or parking.

   3. The sensors may not be able to detect obstacles that are too close to the sensors.

   4. The sensors may not be able to detect obstacles if the sensors have been dropped or subjected to a strong impact.

   5. The sensors may not be able to detect obstacles if the bamper is clashed.