TELEMATICS TRANSCEIVER INSTALLATION

PROCEDURE


  1. INSTALL TELEMATICS TRANSCEIVER


    1. B003S5RN01

      Connect the connectors.

    2. Install the telematics transceiver with the 3 screws.

      Tech Tips

      Tighten the screws in the order shown in the illustration.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
  2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. CHECK SRS WARNING LIGHT

    Click here