NAVIGATION RECEIVER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE


  1. INSTALL NAVIGATION RECEIVER ASSEMBLY

  2. INSTALL NO. 2 RADIO BRACKET


    1. B003QF1

      Install the No. 2 radio bracket to the navigation receiver assembly with the 3 screws.

  3. INSTALL NO. 1 RADIO BRACKET


    1. B003O4E

      Install the No. 1 radio bracket to the navigation receiver assembly with the 3 screws.

  4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET


    1. Connect all the connectors.

    2. B003LBN

      Insert the navigation receiver assembly with bracket.

      Note

      When inserting the navigation receiver assembly, do not press the knobs on it.

    3. Install the navigation receiver assembly with bracket with the 4 screws.

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  6. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  7. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  8. INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.