STEREO JACK ADAPTER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL RADIO WIRE

   
   

   1. 

      Attach the clamps to install the radio wire.

2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

3. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY

   
   

   1. w/o 4WD Switch:

      
      

      1. 

         Install in this Direction

         Attach the claws to install the No. 1 stereo jack adapter assembly.

   2. w/ 4WD Switch:

      
      

      1. 

         Install in this Direction

         Attach the claws to install the No. 1 stereo jack adapter assembly.

4. INSTALL LOWER INSTRUMENT COVER SUB-ASSEMBLY

   Click here

5. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

   Click here

6. INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Cooler System)

   Click here

7. INSTALL CONTROL KNOB SUB-ASSEMBLY (for Manual Cooler System)

   Click here

8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

9. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

10. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

11. INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH

    Click here

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.