INSPECT FRONT NO. 3 SPEAKER ASSEMBLY
Component without harness connected
(Front No. 3 Speaker Assembly)
Measure the resistance according to the value(s) in the table below.
If the result is not as specified, replace the front No. 3 speaker assembly.
When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.
Connect the connectors to the front No. 2 speakers.
When there is a possibility that either the right or left front No. 2 speaker is defective, inspect by interchanging the right one with the left one.
Perform the inspection above on both the LH and RH sides.