INSTRUMENT PANEL SPEAKER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

PROCEDURE


  1. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY

    Note

    Do not touch the cone part of the speaker.


    1. B003M4TC01
      B003R2S Nut

      Remove the 2 nuts.

    2. B003JA5

      Disconnect the connector and remove the front No. 3 speaker assembly.

  3. REMOVE FRONT NO. 1 SPEAKER BRACKET


    1. B003LV2

      Remove the front No. 1 speaker bracket.

  4. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  5. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

    Click here

  6. REMOVE NO. 2 SPEAKER BRACKET


    1. B003K46

      Detach the clamp.

    2. Remove the No. 2 Speaker bracket.