RADIO RECEIVER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE


  1. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

  2. INSTALL NO. 2 RADIO BRACKET


    1. B003JKZ

      Install the No. 2 radio bracket to the radio and display receiver assembly with the 3 screws.

  3. INSTALL NO. 1 RADIO BRACKET


    1. B003QCZ

      Install the No. 1 radio bracket to the radio and display receiver assembly with the 3 screws.

  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET


    1. Connect all the connectors.

    2. B003NIF

      Insert the radio and display receiver assembly with bracket.

      Note

      When inserting the radio and display receiver assembly, do not press the knobs on it.

    3. Install the radio and display receiver assembly with bracket with the 4 screws.

  5. INSTALL RADIO RECEIVER ASSEMBLY

  6. INSTALL NO. 2 RADIO BRACKET


    1. B003MR4

      Install the No. 2 radio bracket to the radio receiver assembly with the 3 screws.

  7. INSTALL NO. 1 RADIO BRACKET


    1. B003K3S

      Install the No. 1 radio bracket to the radio receiver assembly with the 3 screws.

  8. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. Connect all the connectors.

    2. B003OUV

      Insert the radio receiver assembly with bracket.

      Note

      When inserting the radio receiver assembly, do not press the knobs on it.

    3. Install the radio receiver assembly with bracket with the 4 screws.

  9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  10. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  11. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  12. INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH

    Click here

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.