AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) Speaker Circuit

DESCRIPTION

If there is a short in a speaker circuit, the radio receiver assembly detects it and stops output to the speakers.

As a result, sound cannot be heard from the speakers even if there is no malfunction in the radio receiver assembly or speakers.

WIRING DIAGRAM

B003P9NE03

PROCEDURE


  1. CHECK VEHICLE CONDITION


    1. Check the vehicle condition.

      Result
      Result Proceed to
      w/o Telematics Transceiver A
      w/ Telematics Transceiver B

    B

    CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT) Click here

    A

  2. CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)


    • *1: for 6 Speakers

      *2: for LH Side

      *3: for RH Side


    1. Disconnect the G172 and G173 radio receiver assembly connectors.

    2. Disconnect the K4*2 and/or J3*3 front No. 1 speaker assembly connector.

    3. Disconnect the K7*2 and/or J6*3 front No. 2 speaker assembly connector.*1

    4. Disconnect the M2*2 and/or L2*3 rear speaker assembly connector.

    5. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LH Side and 6 speaker:
      Tester Connection Condition Specified Condition
      G172-2 (FL+) - K7-4 (TWL+) Always Below 1 Ω
      G172-6 (FL-) - K7-2 (TWL-) Always Below 1 Ω
      K7-3 (+) - K4-1 Always Below 1 Ω
      K7-1 (-) - K4-2 Always Below 1 Ω
      G173-2 (RL+) - M2-1 Always Below 1 Ω
      G173-6 (RL-) - M2-2 Always Below 1 Ω
      G172-2 (FL+) - Body ground Always 10 kΩ or higher
      G172-6 (FL-) - Body ground Always 10 kΩ or higher
      K7-3 (+) - Body ground Always 10 kΩ or higher
      K7-1 (-) - Body ground Always 10 kΩ or higher
      G173-2 (RL+) - Body ground Always 10 kΩ or higher
      G173-6 (RL-) - Body ground Always 10 kΩ or higher
      for LH Side and 4 speaker:
      Tester Connection Condition Specified Condition
      G172-2 (FL+) - K4-1 Always Below 1 Ω
      G172-6 (FL-) - K4-2 Always Below 1 Ω
      G173-2 (RL+) - M2-1 Always Below 1 Ω
      G173-6 (RL-) - M2-2 Always Below 1 Ω
      G172-2 (FL+) - Body ground Always 10 kΩ or higher
      G172-6 (FL-) - Body ground Always 10 kΩ or higher
      G173-2 (RL+) - Body ground Always 10 kΩ or higher
      G173-6 (RL-) - Body ground Always 10 kΩ or higher
      for RH Side and 6 Speaker:
      Tester Connection Condition Specified Condition
      G172-1 (FR+) - J6-4 (TWR+) Always Below 1 Ω
      G172-5 (FR-) - J6-2 (TWR-) Always Below 1 Ω
      J6-3 (+) - J3-1 Always Below 1 Ω
      J6-1 (-) - J3-2 Always Below 1 Ω
      G173-1 (RR+) - L2-1 Always Below 1 Ω
      G173-3 (RR-) - L2-2 Always Below 1 Ω
      G172-1 (FR+) - Body ground Always 10 kΩ or higher
      G172-5 (FR-) - Body ground Always 10 kΩ or higher
      J6-3 (+) - Body ground Always 10 kΩ or higher
      J6-1 (-) - Body ground Always 10 kΩ or higher
      G173-1 (RR+) - Body ground Always 10 kΩ or higher
      G173-3 (RR-) - Body ground Always 10 kΩ or higher
      for RH Side and 4 Speaker:
      Tester Connection Condition Specified Condition
      G172-1 (FR+) - J3-1 Always Below 1 Ω
      G172-5 (FR-) - J3-2 Always Below 1 Ω
      G173-1 (RR+) - L2-1 Always Below 1 Ω
      G173-3 (RR-) - L2-2 Always Below 1 Ω
      G172-1 (FR+) - Body ground Always 10 kΩ or higher
      G172-5 (FR-) - Body ground Always 10 kΩ or higher
      G173-1 (RR+) - Body ground Always 10 kΩ or higher
      G173-3 (RR-) - Body ground Always 10 kΩ or higher
      Result
      Proceed to
      OK
      NG

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  3. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY


    1. Remove the front No. 1 speaker assembly.

      Click here

    2. Inspect the front No. 1 speaker assembly.

      Click here

      Result
      Proceed to
      OK
      NG

    NG

    REPLACE FRONT NO. 1 SPEAKER ASSEMBLY Click here

    OK

  4. INSPECT REAR SPEAKER ASSEMBLY


    1. Remove the rear speaker assembly.

      Click here

    2. Inspect the rear speaker assembly.

      Click here

      Result
      Proceed to
      OK (for 6 Speaker)
      OK (for 4 Speaker)
      NG

    OK (for 4 Speaker)

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    NG

    REPLACE REAR SPEAKER ASSEMBLY Click here

    OK (for 6 Speaker)

  5. CHECK FRONT NO. 2 SPEAKER ASSEMBLY


    1. Replace the front No. 2 speaker assembly.

      Click here

    2. Check the malfunction disappears.

      OK
      Malfunction disappears.

      Tech Tips


      • Connect all the connectors to the rear No. 2 speaker assemblies that were disconnected.

      • When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.

      • Perform the above inspection on both the LH and RH sides.

      Result
      Proceed to
      OK
      NG

    OK

    END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

  6. CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)


    • *1: for 6 Speakers

      *2: for LH Side

      *3: for RH Side


    1. Disconnect the G172 and G173 radio receiver assembly connectors.

    2. Disconnect the K4*2 and/or J3*3 front No. 1 speaker assembly connector.

    3. Disconnect the K7*2 and/or J6*3 front No. 2 speaker assembly connector.*1

    4. Disconnect the M2*2 and/or L2*3 rear speaker assembly connector.

    5. Disconnect the G180 telematics transceiver connector.

    6. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LH Side and 6 speaker:
      Tester Connection Condition Specified Condition
      G172-2 (FL+) - K7-4 (TWL+) Always Below 1 Ω
      G172-6 (FL-) - K7-2 (TWL-) Always Below 1 Ω
      K7-3 (+) - K4-1 Always Below 1 Ω
      K7-1 (-) - K4-2 Always Below 1 Ω
      G173-2 (RL+) - M2-1 Always Below 1 Ω
      G173-6 (RL-) - M2-2 Always Below 1 Ω
      G172-2 (FL+) - Body ground Always 10 kΩ or higher
      G172-6 (FL-) - Body ground Always 10 kΩ or higher
      K7-3 (+) - Body ground Always 10 kΩ or higher
      K7-1 (-) - Body ground Always 10 kΩ or higher
      G173-2 (RL+) - Body ground Always 10 kΩ or higher
      G173-6 (RL-) - Body ground Always 10 kΩ or higher
      for LH Side and 4 speaker:
      Tester Connection Condition Specified Condition
      G172-2 (FL+) - K4-1 Always Below 1 Ω
      G172-6 (FL-) - K4-2 Always Below 1 Ω
      G173-2 (RL+) - M2-1 Always Below 1 Ω
      G173-6 (RL-) - M2-2 Always Below 1 Ω
      G172-2 (FL+) - Body ground Always 10 kΩ or higher
      G172-6 (FL-) - Body ground Always 10 kΩ or higher
      G173-2 (RL+) - Body ground Always 10 kΩ or higher
      G173-6 (RL-) - Body ground Always 10 kΩ or higher
      for RH Side and 6 Speaker:
      Tester Connection Condition Specified Condition
      G172-1 (FR+) - G180-2 (SPI+) Always Below 1 Ω
      G172-5 (FR-) - G180-3 (SPI-) Always Below 1 Ω
      G180-5 (SPO+) - J6-4 (TWR+) Always Below 1 Ω
      G180-6 (SPO-) - J6-2 (TWR-) Always Below 1 Ω
      J6-3 (+) - J3-1 Always Below 1 Ω
      J6-1 (-) - J3-2 Always Below 1 Ω
      G173-1 (RR+) - L2-1 Always Below 1 Ω
      G173-3 (RR-) - L2-2 Always Below 1 Ω
      G172-1 (FR+) - Body ground Always 10 kΩ or higher
      G172-5 (FR-) - Body ground Always 10 kΩ or higher
      G180-5 (SPO+) - Body ground Always 10 kΩ or higher
      G180-6 (SPO-) - Body ground Always 10 kΩ or higher
      J6-3 (+) - Body ground Always 10 kΩ or higher
      J6-1 (-) - Body ground Always 10 kΩ or higher
      G173-1 (RR+) - Body ground Always 10 kΩ or higher
      G173-3 (RR-) - Body ground Always 10 kΩ or higher
      for RH Side and 4 Speaker:
      Tester Connection Condition Specified Condition
      G172-1 (FR+) - G180-2 (SPI+) Always Below 1 Ω
      G172-5 (FR-) - G180-3 (SPI-) Always Below 1 Ω
      G180-5 (SPO+) - J3-1 Always Below 1 Ω
      G180-6 (SPO-) - J3-2 Always Below 1 Ω
      G173-1 (RR+) - L2-1 Always Below 1 Ω
      G173-3 (RR-) - L2-2 Always Below 1 Ω
      G172-1 (FR+) - Body ground Always 10 kΩ or higher
      G172-5 (FR-) - Body ground Always 10 kΩ or higher
      G180-5 (SPO+) - Body ground Always 10 kΩ or higher
      G180-6 (SPO-) - Body ground Always 10 kΩ or higher
      G173-1 (RR+) - Body ground Always 10 kΩ or higher
      G173-3 (RR-) - Body ground Always 10 kΩ or higher
      Result
      Proceed to
      OK
      NG

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  7. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY


    1. Remove the front No. 1 speaker assembly.

      Click here

    2. Inspect the front No. 1 speaker assembly.

      Click here

      Result
      Proceed to
      OK
      NG

    NG

    REPLACE FRONT NO. 1 SPEAKER ASSEMBLY Click here

    OK

  8. INSPECT REAR SPEAKER ASSEMBLY


    1. Remove the rear speaker assembly.

      Click here

    2. Inspect the rear speaker assembly.

      Click here

      Result
      Proceed to
      OK (for 6 Speaker)
      OK (for 4 Speaker)
      NG

    OK (for 4 Speaker)

    CHECK TELEMATICS TRANSCEIVER Click here

    NG

    REPLACE REAR SPEAKER ASSEMBLY Click here

    OK (for 6 Speaker)

  9. CHECK FRONT NO. 2 SPEAKER ASSEMBLY


    1. Replace the front No. 2 speaker assembly.

      Click here

    2. Check the malfunction disappears.

      OK
      Malfunction disappears.

      Tech Tips


      • Connect all the connectors to the rear No. 2 speaker assemblies that were disconnected.

      • When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.

      • Perform the above inspection on both the LH and RH sides.

      Result
      Proceed to
      OK
      NG

    OK

    END (FRONT NO. 2 SPEAKER ASSEMBLY IS DEFECTIVE)

    NG

  10. CHECK TELEMATICS TRANSCEIVER


    1. Replace the telematics transceiver with a new one.

      Click here

    2. Check the malfunction disappears.

      OK
      Malfunction disappears.
      Result
      Proceed to
      OK
      NG

    OK

    END (TELEMATICS TRANSCEIVER IS DEFECTIVE)

    NG

    REPLACE RADIO RECEIVER ASSEMBLY Click here

  11. CHECK TELEMATICS TRANSCEIVER


    1. Replace the telematics transceiver with a new one.

      Click here

    2. Check the malfunction disappears.

      OK
      Malfunction disappears.
      Result
      Proceed to
      OK
      NG

    OK

    END (TELEMATICS TRANSCEIVER IS DEFECTIVE)

    NG

    REPLACE RADIO RECEIVER ASSEMBLY Click here