STEERING GEAR DISASSEMBLY

CAUTION / NOTICE / HINT

Note


  • When using a vise, place aluminum plates between the part and vise.

  • When using a vise, do not overtighten it.

PROCEDURE


  1. REMOVE STEERING TURN PRESSURE TUBE


    1. B003PJR

      Remove the union bolt and 2 gaskets.

    2. Using a union nut wrench, remove the 2 steering turn pressure tubes.

    3. Remove the 3 O-rings.

  2. SECURE POWER STEERING LINK ASSEMBLY


    1. B003M3BN01

      Using SST, secure the power steering link assembly.

      SST
      09612-00012

  3. REMOVE TIE ROD END SUB-ASSEMBLY LH


    1. B003OQJC01
      *1 Rack End
      *a Matchmark

      Place matchmarks on the tie rod end sub-assembly LH, lock nut and rack end.

    2. Loosen the lock nut and remove the tie rod end sub-assembly LH and lock nut.

  4. REMOVE TIE ROD END SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. REMOVE STEERING RACK BOOT CLAMP LH


    1. B003OLY

      Using a screwdriver, remove the steering rack boot clamp LH.

      Note

      Be careful not to damage the steering rack boot LH.

  6. REMOVE STEERING RACK BOOT CLAMP RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE STEERING RACK BOOT CLIP LH


    1. Using pliers, remove the steering rack boot clip LH.

      Note

      Be careful not to damage the steering rack boot.

  8. REMOVE STEERING RACK BOOT CLIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE STEERING RACK BOOT LH

  10. REMOVE STEERING RACK BOOT RH

  11. REMOVE STEERING RACK END SUB-ASSEMBLY


    1. B003N3OC01
      *A for LH Side
      *B for RH Side
      *a Hold
      *b Turn

      Using SST, hold the steering rack end sub-assembly.

      SST
      09922-10010

    2. Using SST, remove the steering rack end (LH side) from the steering rack sub-assembly.

      SST
      09922-10010

      Note

      Rotate SST in the direction shown in the illustration.

    3. Using SST, remove the steering rack end (RH side) from the steering rack sub-assembly.

      SST
      09922-10010

      Note

      Rotate SST in the direction shown in the illustration.