STEERING PAD SWITCH INSTALLATION

PROCEDURE

1. INSTALL STEERING PAD SWITCH ASSEMBLY

   
   

   1. Attach the 6 guide pins and 2 screws, and install the steering pad switch assembly.

   2. Install the 2 screws.

   3. Connect the connectors to the spiral cable sub-assembly.

2. INSTALL STEERING WHEEL PAD ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. CHECK SRS WARNING LIGHT

   Click here